Friday, March 6, 2015

Electronics Merit Badge




This last Saturday I had the opportunity to volunteer to teach a few Boy Scouts the Electronics merit badge.



We had a good time talking about various electronics components, building and soldering an electronic kit.



The kit we put together was a noisy little police siren kit. Amazingly all of the boys were able to complete their kits without frying any transistors or IC chips.



We also got to play with a Metcal station which did a consistent and amazing job with the soldering tasks.


Electronics merit badge requirements

1. Describe the safety precautions you must exercise when using, building, altering, or repairing electronic devices.
2. Do the following:
a. Draw a simple schematic diagram. It must show resistors, capacitors, and transistors or integrated circuits, Use the correct symbols. Label all parts.
b. Tell the purpose of each part.
3. Do the following:
a. Show the right way to solder and desolder.
b. Show how to avoid heat damage to electronic components.
c. Tell about the function of a printed circuit board. Tell what precautions should be observed when soldering printed circuit boards.
4. Discuss each of the following with your merit badge counselor, and then choose ONE of the following and build a circuit to show the techniques used:
a. Tell how you can use electronics for a control purpose, and then build a control device circuit.
b. Tell about the basic principles of digital techniques, and then build a digital circuit. Show how to change three decimal numbers into binary numbers, and three binary numbers into decimal numbers.
c. Tell about three audio applications of electronics, and then build an audio circuit.
Show how to read the schematic diagram of the project you choose and, to the best of your ability, explain to your counselor how the circuit you built operates.
5. Do the following:
a. Show how to solve a simple problem involving current, voltage, and resistance using Ohm's law.
b. Tell about the need for and the use of test equipment in electronics. Name three types of test equipment. Tell how they operate.
6. Find out about three career opportunities in electronics that interest you. Discuss with and explain to your counselor what training and education are needed for each position. 
Source: Electronics - MeritBadgeDotOrg





2 comments:

  1. Hi, Kenneth your post dealing with home automation and programming is interesting. Your work on the sketch book folder looks amazing. Thank you very much for the post.

    ReplyDelete
  2. These are helpful Instructions are provided about Electronics Merit Badge and I want to follow all these above. By the way, I have bookmarked the site for further assistance about circuit board. Thanks and keep up the great work.

    ReplyDelete

Please be respectful.